Red Dead Redemption 2

Project: rdrPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Dark Red Transmission Distance: 8.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Yellow Bird Transmission Distance: 4 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Red At layer #13 (1.12mm) swap to Basic Red At layer #20 (1.68mm) swap to Yellow for the rest.