Red Dragon HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 111.63x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to Lemon Yellow At layer #14 (1.2mm) swap to Jade White for the rest.