Thingiverse
RED DSMC2 Cable Guide
von MaartenMakes
19
Downloads
11
Likes
0
Makes
This part can be used to guide your cables on a RED DSMC2 cinema camera.
I use it in combination with my SmallHD Cine 7 monitor.
Make sure to not force the cables into the guide as it might damage the cables.
Feel free to alter the width of the part in 3D software or by manually sanding down the edges.
PLA might be too brittle and deform in warm temperatures.
PETG works.
PETG-Carbon fiber reinforced is what I had the best luck with.
Find me on Instagram: @maartenslooves
I use it in combination with my SmallHD Cine 7 monitor.
Make sure to not force the cables into the guide as it might damage the cables.
Feel free to alter the width of the part in 3D software or by manually sanding down the edges.
PLA might be too brittle and deform in warm temperatures.
PETG works.
PETG-Carbon fiber reinforced is what I had the best luck with.
Find me on Instagram: @maartenslooves
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
