Red Emergency Button Clicker!!!

🔴 The Ultimate Red Button Clicker Fidget Toy Welcome to the ultimate desktop companion! This Red Button Clicker is a mechanical fidget toy designed to give you a highly satisfying, clicky feel every time you press it. It is completely optimized for Bambu Lab printers. The model is split into two distinct plates so you can print it in two colors without needing an AMS (Automatic Material System). ✨ Key Features Pocket-Sized Design: Easy to carry around or keep right on your desk. No-AMS Multi-Color: Designed across two plates so anyone can get a cool two-tone look. Print-Tested: Fully sliced and tested using high-quality settings for a perfect mechanical fit. 📊 Complete Print & Material Breakdown Plate 1: The Main Base This is the outer housing that holds the button mechanism. It is designed for maximum stability. Material Weight: 14.04 grams Filament Length: 4.63 meters Actual Print Time: 35 minutes, 43 seconds Total Time: 42 minutes, 13 seconds (includes bed heating and calibration) Plate 2: The Button Cap This is the bouncy top piece that you actually press down on. Material Weight: 6.52 grams Filament Length: 2.15 meters Actual Print Time: 18 minutes, 2 seconds Total Time: 24 minutes, 33 seconds 🖨️ Exact Slicer Profile Details Slicer Setting CategorySpecific OptionPrecise ValueGlobal QualityLayer Height0.16 mm (High Quality)Wall SettingsOrder of WallsInner wall / Outer wallInfill SettingsSparse Infill Density15%Infill SettingsInfill PatternGyroidSpeed ProfileOuter Wall Speed60 mm/sSpeed ProfileInner Wall Speed150 mm/sSpeed ProfileInitial Layer Speed50 mm/sBed AdhesionBrim TypeAuto Brim (5mm Width) 🛠️ Step-by-Step Printing & Assembly Guide Step 1: Repair the File When you load Cap.stl, Bambu Studio might show a small popup warning about 9 non-manifold edges. This just means the 3D mesh has a tiny math error. Simply click the popup or right-click the model to Repair it automatically before slicing. Step 2: Prep Your Build Plate We highly recommend using a Bambu