Red Fox (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyLite White Transmission Distance: 5 I used the colors I had on hand Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to White for the rest.