red hood

by whiskey_actual

1 Downloads

0 Likes

0 Makes

Download Model

red hoodie horns demon devil dark

Project: Red hood Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.52mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Gray Transmission Distance: 2.5 PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Pink Transmission Distance: 0This print uses 4 unique filaments!!!! It appear