Slicer Discord
Red mini speedy plank fuselage. – 3D printable model from Thingiverse Thingiverse

Red mini speedy plank fuselage.

by _Dave
22 Downloads
16 Likes
0 Makes
Go to Model
I really like the Wersy Speedy "Red Mini Wing" https://www.thingiverse.com/thing:1117576 and decided to rebody his wing.

Planks in general fly as straight as an arrow and will out turn and bank all rear motored swept wing models. If you want to learn to fly a plank this one isn't for you.

I wanted an external motor to allow more heat dissipation. I have over heated the motor and it melted the firewall with the speedy red mini wing fuselage.

Wanted room for a bigger battery There are many quad 1300-1500mah4s batteries out there with a 100c rating.

The body has two main sections connected with a glued in connector. The stabilizer glues into the fuselage. I use 1/8" bamboo skewers through the fuselage to hold the wing on with a rubber band. The battery is inserted through the wing opening. Makes for a much stronger nose section.

The fuselage is a small bit lighter than the original and has a lower, smaller vertical stabilizer. I also incorporated good sized wing root f
Source
Thingiverse
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection