Red XIII

Project: red.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA Smartfilm recycled Black Transmission Distance: 0.6 PLA BSmartfilm recycled Red Transmission Distance: 4 PLA Smartfilm recycled Yellow Transmission Distance: 6 PLA Smartfilm recycled White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #27 (2.24mm) swap to Jade White for the rest.