Reddit Request

Project: reddit hueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x162.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Blue At layer #13 (1.12mm) swap to Dark Red At layer #20 (1.68mm) swap to Orange At layer #24 (2mm) swap to Yellow At layer #32 (2.64mm) swap to Beige for the rest.