Redheaded Model - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.97x240.02mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Jade White for the rest.