Regalo Spindle Rods

Here is a model that can be used to replace or supplement the original Regalo pressure mounted spindle rods. This design will use a 5/16 nut (or M8) that measures 12.7 mm x 6mm and will be held captive in the model. You will also need a 5/16 or M8 bolt that is long enough for the distance that you need, probably around 5" or 127 mm. The wall bumper has a hex shaped pocket for 12.7mm or ½" sized bolt head. If using an M8 bolt, you may need to modify the model slightly, or modify the bolt. I, however, chose to heat up the bolt head and just melt the pocket to the bolt head; it saved gluing it in place. You could choose to print the wall pumper in TPU if you do not wish to use the wall cups. Boost MeBoost me if you found this to be useful.