Reinforcement bars for 3D printable rack

A set of reinforcement bars for my 3D printable rack system. You can use those bars to make the 3D printable rack more robust. This can be especially useful if you are wall mounting your rack. This model is part of a series of accessories for my 3D printable rack system. You can check the other models here: 6-inch rack accessories. 10-inch rack accessories. I've made those bars in two versions. I call them “single bar” and “triple bar”.  The specs are as follows: Do you like my models? Consider buying me a coffee ;) Required parts 2x M5 heat threaded inserts per “single bar”. 4x M5 heat threaded inserts per “triple bar”. Same number of screws as thread inserts. Max screw length for the mounts: M5x30mm. Assembly instructions Add the M5 heat threaded inserts into the reinforcement bars. To install the bar, align it with both front and back rails, and insert the M5 screws until it's fully inserted. If you have a mount in the same rail holes you're adding the reinforcement bars, you have to place the mount in the desired place before adding the front rail screws. Print Settings Rafts: Doesn't Matter. Supports: No. Walls/Perimeters: 150mm version: At least 3. 200mm version: At least 4. 250mm version: At least 5. Resolution: 0.2 or 0.24 Infill: 150mm and 200mm versions: 20% or more. 250mm version: 25% or more. Filament: Any rigid filament.