Thingiverse

reittec polisher

von reitter_m

20.5k Downloads

16.3k Likes

19 Makes

Zum Modell

For more videos and pictures please visit:
https://www.instagram.com/reittec/

Also see the new 170mm kit:
https://www.thingiverse.com/thing:4076827

For even better results please see:

https://www.thingiverse.com/thing:4614635/files

As polishing drum I used this: https://www.ikea.com/at/de/p/sinnerlig-dose-mit-deckel-klarglas-kork-40305787/

As motor I use the PGM 37DC12/77 in combination with a 12VDC 500ma power supply.

To glue every thing on the glas I used this:
https://at.rs-online.com/web/p/epoxidharze-und-epoxidharzkleber/3210799/

The material that I use to polish my parts is silicon carbide:
F12
F24
F60
F220 &
F800

I typically polish up to five parts at once. First polish the parts 12-24h with the F12 carbide. The time depends on the geometry and the size of your parts. Increase the number of granulation. For extermely smooth surfaces I polished my parts at least 6 hours with each granulation. The last step is to polish the parts with the F800 for

drum grinding Polisher polishing smooth smoothing surface smoothing drum grinding Polisher polishing smooth smoothing surface smoothing drum grinding Polisher polishing smooth smoothing surface smoothing

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker