Slicer Discord
relOJos  (cross-eyed clock) – 3D-Druckmodell von MakerWorld MakerWorld
Decor

relOJos (cross-eyed clock)

34 Downloads
33 Likes
12 Makes
Zum Modell
Tired of the usual designs...here's a…Cross-eyed Watch! This original clock will tell you the time through its gaze!The left eye will indicate the hours of the day (and night), while the right eye will indicate the minutes.The design is intentionally kept "clean" but it will certainly be an impactful clock! Example: "relOJos" in action... 1 Hour Timelapse: - . - . - . - . - . - . - . - . - . - Its installation is very simple: 1) Place the rubber washer.2) Insert the mechanism from the inside.3) Insert the metal washer.4) Tighten with the appropriate nut.(replicate for both dials). 5) Pair the black sphere above the white sphere, keeping the white dot on the outside.6) Flatten the pins using a lighter and a flat screwdriver. (Children, have your parents do it). 7) Insert the dial with th
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Ca. Druckzeit
1 h
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen