Remake

Original from the end of 90's :) It was designed by Autocad, modelled by Mechanical Desktop few years later... and animated by Inventor today... Note: that 12 years old ugly gif is mine too :D The “three-shaft form-programmed” machine makes all its moves under control. Its purpose is to guide the – ice-scream shaped – work pieces, arriving continuously in six rows, onto a perpendicular conveyor, rearranging the six rows into twelve at the same time. Functioning: The chain pins, driven through the forced trajectories by a six-tooth sprocket, carry one cart a pair. The cart is able to move up and down the pins and this movement is “controlled” by the bearing joint to the bottom of the cart. The bearing runs on a forced trajectory containing two slopes. Through the cart, a sledge is sliding sideways on a horizontally playing shaft: a separate stock is fastened to both the cart and the sledge – their scales correspond to the work piece. The bearing running on the inner forced trajectory is responsible for moving the shafts, and so the sledge too. Their relation of movement is determined by the runner transmission. Extra: http://korezon.hu/visual/barta/ ... that will be time for you to practice how should push the button :D