Thingiverse
Remix Parts
von 55samba
10
Downloads
14
Likes
0
Makes
Parts Sharing. Please feel free to print and use the files. Thank you Slug for the Caliburn design, I love it.
A couple of modifications to slugs tcv3 parts.
12/20/2020 Ram base that prints at .2mm and snug fit to aluminum ram.
On the lower mag, I lowered the spring tabs and moved them forward. Way less spring tension and with larger nubs to hold the springs. It still hold the magazines fine.
Made the sear even lower profile in the back.
The front clamp but with ticker pads between the screw and nut, you will need a longer screw.
The piston mod is just to add a taper at the bottom in case you squish the first layers on the print bed. This new piston seems to seal very well, not cause of my mod but his design.
A couple of modifications to slugs tcv3 parts.
12/20/2020 Ram base that prints at .2mm and snug fit to aluminum ram.
On the lower mag, I lowered the spring tabs and moved them forward. Way less spring tension and with larger nubs to hold the springs. It still hold the magazines fine.
Made the sear even lower profile in the back.
The front clamp but with ticker pads between the screw and nut, you will need a longer screw.
The piston mod is just to add a taper at the bottom in case you squish the first layers on the print bed. This new piston seems to seal very well, not cause of my mod but his design.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!