![[Remix] Prusa i3 MK2: Raspberry Pi Camera Mount - The Round Tower – 3D printable model from Thingiverse](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F79%2F5d%2Fd6%2F42%2F9b%2Fd927f3caf7402fd4549ad7bfea126038_display_large.JPG&w=800&h=800)
Thingiverse
[Remix] Prusa i3 MK2: Raspberry Pi Camera Mount - The Round Tower
by beckflash
33
Downloads
11
Likes
0
Makes
This is just a little fix for the magnificent [Prusa i3 MK2: V1 Raspberry Pi Camera Mount - The Round Tower](http://www.thingiverse.com/thing:1892617) by [Martin Majewski](http://www.thingiverse.com/MartinMajewski).
When inserting the camera into the holder, the original holder was too tight for the camera (Amazon [US](https://www.amazon.com/dp/B01ICLLOZ8), [DE](https://www.amazon.de/dp/B01ICNT3HC)). It bent and broke. I measured the camera and found that the rest for the camera was too narrow. Maybe the manufacturer has changed the proportions of the camera slightly.
I modeled the camera holder after the original STL and fitted it to my needs. Now the camera rest is 5mm wide instead of 4 mm. Fusion 360 file is included for your own customization.
For print settings please refer to the original thing.
When inserting the camera into the holder, the original holder was too tight for the camera (Amazon [US](https://www.amazon.com/dp/B01ICLLOZ8), [DE](https://www.amazon.de/dp/B01ICNT3HC)). It bent and broke. I measured the camera and found that the rest for the camera was too narrow. Maybe the manufacturer has changed the proportions of the camera slightly.
I modeled the camera holder after the original STL and fitted it to my needs. Now the camera rest is 5mm wide instead of 4 mm. Fusion 360 file is included for your own customization.
For print settings please refer to the original thing.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
