Slicer Discord
Remixed Sample Tag from 3341363 – 3D-printbaar model van Thingiverse Thingiverse

Remixed Sample Tag from 3341363

door Photog1
15 Downloads
7 Likes
0 Makes
Model downloaden
I took the original "swatch" (sample) from Thing:3341363 and threw it into Fusion 360 to remodel it, and added the numerical thicknesses to the cutout area.

I recommend printing this at 0.1mm layer height, so that the first cutout (0.2mm) has two layers to it, but maximum layer height should be 0.2mm, as the cutouts step at 0.2mm increments.

I also recommend that the original boxes be increased to 102% (Width) and 106% (Length) because I found the samples had issues sliding in and out (that could be because of my 0.6mmm nozzle I used for the PETG with which I made them)

BTW, the original poster never said, but the labels to use for these are AVERY 8167 or equivalent.
Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
0.10mm lagen
Eendelig
Supports 1/3
Montage 0/3
Instellingen 2/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PETG
Laaghoogte
0.1 mm
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Photog1 publiceert ook op

2 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie