Removable 2nd Screen mount for Steam Deck

This Mount is designed for the PeakDo 7 inch Portable Touchscreen.

Here Are the parts you'll need:
Screen: https://www.amazon.com/dp/B0DF1P542S?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
USB cable: https://www.amazon.com/dp/B0D5H9ZP7L?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
4 M3x6 flat head screws
4 M3 nuts
2 M3x50 socket head cap screws

Remove the backplate and use the Drill jig to help you line up the holes for the base of the mount. Use a 3mm drill bit.

Then, from the inner side of the backplate, you need to countersink the holes you drilled. This will allow your screws to be flush with the backplate. Otherwise they could potentially break or short circuit something.

Use the M3x6 flathead screws and the M3 nuts to attach the Base to the backplate. Do not overtighten the screws, this could crack you backplate. Just make them tight enough that thew wont shake loose. You could also add a drop of Loctite to each of the nuts for extra security. Add a small piece of electrical tape