REP QuickDraw 1 lb Change Plate

Change plate for use in loading micro-weight on the REP Fitness Quick-draw adjustable dumbbells. Obviously print and use AT YOUR OWN RISK. To be printed in TPU. Only works with 15lbs and above since the primary dumbbell chassis is not magnetic. But all of the weight plates are, so as long as you have at least 1 plate loaded on a side it can be attached. To be printed with these specific magnets: https://www.amazon.com/dp/B00IYFNT4M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1. There is a pause in the print to insert the magnets. The print profile calls for a .8 hotend. And the only .8 hotend available for the A1 is hardened steel, which is also magnetic. So you have to use these specific types of magnets and with print orientation of magnet side down; this prevents the hotend from getting magnetized. Magnets are very strong, even survived the drop test a few times, but not 100%. So in my opinion suitable for normal use. Just be careful if doing something overhead like a fly and don’t smash t