Slicer Discord
Replicator 2x E3D-v6 Upgrade – 3D-printbaar model van Thingiverse Thingiverse

Replicator 2x E3D-v6 Upgrade

door cadsys
451 Downloads
267 Likes
5 Makes
Model downloaden
UPDATE 12-27-2020: Added v11 holder. Now you can adjust the left hotend up and down. Use an M3 nut and an M3 set screw or cap screw. I have not printed this yet to test so let me know how it works!

UPDATE 12-12-2020: E3D has k-couple cartridge available for the V6 heater block
https://e3d-online.com/products/type-k-thermocouple-cartridge?_pos=1&_sid=a9928e8ed&_ss=r
or in the states
https://www.matterhackers.com/store/l/e3d-type-k-thermocouple-cartridge/sk/MNXPV29Z

UPDATE 7-10-2019: New files uploaded. Improved tolerances for "right off-the bed" use. I highly recommend using Poly-Carbonate for this print, but I will say my original ABS one lasted many prints and performed quite well.

UPDATE 6-23-2019: Added V2 files. Rounded edges for a sleeker look. Modified fan ducts to allow for more space to run wires. Went back to the old design....no extra recess for nozzle leveling. Putting a small shim under one side where the holder bolts to the carriage seems to work just fine.

Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
2 kleuren
Eendelig 2 kleuren / AMS Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
ABS
Kleuren
2 (AMS/MMU aanbevolen)
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie