Resin Agitator

This is a resin agitator I designed with parts I had on hand. I created an Amazon shopping list for all the parts you'll need but many may be sourceable cheaper or already on hand.

Amazon shopping List: https://a.co/9fslXAx

Parts needed.

1x - 12v 100 RPM Motor part #ZGB37RG 47.5i # 170703A6587
1x - RioRand Motor speed controller 1203BB
2x - 8mm x 240mm linear rod (found in many older 3D Printers)
8x - M3 x 8mm Button head screws (4 hold Motor to Near End plate, 4 secure the cover to the Motor Bottom Mount)
4x - M3 x 16mm Button head screws (these secure the Motor Bottom Mount to the Base through the Near End plate)
4x - M3 x 10mm Button head screws (these secure the Far End plate to the Bottom)
2x - M3 x 35mm Button head screws (these secure Motor Mount Top to the Motor Bottom Mount)
4x - #4 x 3/8" Thread cutting screws.

Attach the Motor to the Near End plate, then press the Motor Gear on the motor, secure the motor to the Motor Bottom Mount with the Motor Top Moun