Resin Support Test

I designed this piece to be able to define the most appropriate parameters to ensure that the supports of our 3D pieces are made correctly and not have problems in our figures, apart from being able to have a physical reference of the supports that we want to place, since in some cases it is difficult Get an idea of these characteristics with just the measurements we give them in the configurations we give them.
The piece used for the images was made on an Elagoo Saturn printer, with a layer height of 0.05mm, and an exposure of 3.5 seconds, and a base lifting speed of 35/min and the resin used was Anycubic brand Wather-wash resin+ color Gray.

The diameters of the piece are 20mm x 20mm x 44mm
Diameter Size Of The Middle Support Body 1mm
Contact Shape Diameter (mm) 0.80; 0.60; 0.40; 0.70; 0.50; 0.30
For each Contact Shape Diameter there are 3 supports of that measurement


I hope that the description I am giving you is understood xD because I used Google Translate xD

This te