RESIN UV CURING CHAMBER
door WF3D
29
Downloads
14
Likes
0
Makes
These are the files for a 3D printed Resin UV Curing Chamber.
The model is split in two pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3)
All parts are rotated for optimal printing with minimal supports.
For assembly I recommend using 2x M4x30 mm screws, one smaller M3x15 mm screw an one magnet.
In addition you'll need mirror foil, a UV LED strip (3 m) and a solar powered lazy susan. Paint it as you desire. ;)
Use high % infill when printing otherwise the top layers may fail as they did for me.
You can also see a video about the build process right here: https://youtu.be/7SArh9Wjapw
The model is split in two pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3)
All parts are rotated for optimal printing with minimal supports.
For assembly I recommend using 2x M4x30 mm screws, one smaller M3x15 mm screw an one magnet.
In addition you'll need mirror foil, a UV LED strip (3 m) and a solar powered lazy susan. Paint it as you desire. ;)
Use high % infill when printing otherwise the top layers may fail as they did for me.
You can also see a video about the build process right here: https://youtu.be/7SArh9Wjapw
WF3D publiceert ook op
56 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
