retail rake

Retail hook rake for people with fat/clumsy hands and for those who want to reduce the spread of covid-19, should be short enough to print on a large printer, but designed with the cr-30 in mind

Printing: (these are a guide and of course you need to make sure what you use works with your printer)

Printed in kiri:moto for the cr-30 with
layer -
height of .2
shell, top, solid, and base count of 3

Base -
shell speed of 25
flow factor 1
Brim sides 20
Everything else in this tab is 0 except for part anchor which is 2

Infill -
type is hex
fraction is 0.5
shell overlay is 0.3
speed is 0
solid start is 45

Support -
Extruder is 0
Density is 0.25
Pillar size is 6
part offset 0.4
min area 0.25
expand is 1
max angle is 1
(I clicked on detect because cylinders fail otherwise)

Output -
Nozzle 190
Bed 50
fan 255
print speed 30
finish speed 20
move speed 50
shell, solid, and infill factor 1.1
shell order out-in
layer start last
layer retract (unchecked