Retracto X-ACTO

A small, functional utility knife for a No.11 X-ACTO Blade. Designed to be Assemblable & Disassemblable by hand, requiring only a couple dabs of superglue to hold the buttons in place. Snaps together without any fasteners. To Assemble: 1. Superglue the buttons to the blade housing. Either side will work. 2. Insert No.11 X-ACTO into the recessed slot on smaller side of the blade housing 3. Slide the blade holding half up into the larger half of the housing (blade-in-first). you may need to use your thumb to bend the other half to allow the pin to drop in. The housing should slide with little resistance; if it binds, check that the blade has not fallen out. 4. Place the now-complete blade holder in one half of the body, resting in the closed position slot. Ensure that the blade is oriented in the correct direction. 5. Ensuring that the pin / slot that holds the body together are on the same side, place the other half of the body on the button of the blade housing, in the open position sl