Retractor

Material: PLA, Nylon
Infill: 100% !IMPORTANT
1 device = 4 plates & 4 screws
1 device (mini) = 4 plates (mini) & 4 screws

The mini version is used for limbs surgery. Common is for body surgery.

INSTRUCTIONS
To start with make sure to print exactly necessary components!
Actual information is pinned to the top of the chat.
https://t.me/ua3dprint

What concerns printing:
Infill: 100%
Material: PLA, Nylon
Layer height: 0.2-0.3mm
Nozzle diameter: 0.4mm
Support: NO
Orientation as on the drawing

Retractor:
One set consists of 4 plaques (medkit_plate_v5.3.stl) & 4 screws (medkit_screw_v5.3.stl)

Retractor mini:
One set consists of 4 plaques (medkit_plate_mini_v5.3.stl) & 4 screws (medkit_screw_v5.3.stl)

ABOUT MATERIALS
PLA is the main material proven and reliable.
Nylon is good, but very expensive and demanding. Recommended for experienced makers with a good supply.
________________________________________________
Материал: ПЛА, не используйте PETG