retrato samurai

Project: retrato samurai.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.1mm and the Actual Depth is 3.1mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil Gray Transmission Distance: 3 PLA smartfil marron Transmission Distance: 5 PLA smartfil acacia Transmission Distance: 1.4 PLA smartfil White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with negro At layer #9 (0.8mm) swap to Gray At layer #14 (1.2mm) swap to marron At layer #19 (1.6mm) swap to acacia At layer #26 (2.16mm) swap to White for the rest. Proyecto: retrato samurai.hfpImprima con un relleno del 100 % con una altura de capa de 0,08 mm y una capa base de 0,16 mmEl modelo mide 133,33 x 200 mmPuede imprimir con alturas de capa superiores por debajo de la profundidad mínima de 0,48 mmLa profundidad máxima es de 3,1 m