Retro Arcade Stick

What you need :Buttons, stick and controller like this one https://www.amazon.fr/dp/B01HJKLAV6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1M3 brass inserts https://www.amazon.fr/dp/B0BZVGQ91H?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2M3 screws https://www.amazon.fr/dp/B09BJFM8W4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3Description :This model is 250 x 150 x 47 mm so it fits my Bambu P1S print bed. I was inspired by the design of the 8BitDo Arcade Stick.I used the Textured PEI Plate for the top and bottom parts and the 3D Effect Carbon Fiber Plate for the buttons base.If you don&#39;t want to make a multicolor model there is a file for that (Arcade-stick_top-full)Printing :I used basic print settings with a 0.4mm nozzle and 0.2mm layer height with supports and brim activated.It is a little less than 300g and around 8hours of printing<img src="https://makerworld.bblmw.com/makerworld/model/DSM000000012