Retro Car '60 style

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Sky Blue At layer #17 (1.44mm) swap to Temp Purple-Pink-Translucent (Med) At layer #21 (1.76mm) swap to Yellow for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print