MakerWorld

Other Miniatures

Retro Tv

by filip.bohy.fb · Other Miniatures

17 Downloads

12 Likes

1 Makes

I printed from Pet-G, but any material can be used.Printed 0.2 layerfill 15%printed on P1P approximately 1.5 hoursŠtítky

tv retro smart desing

Category

Other Miniatures

Source

MakerWorld

Published

30.01.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Retro Tv need supports when printing?

Yes, Retro Tv will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Retro Tv?

According to the design notes, Retro Tv takes approximately 1.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Retro Tv available in?

Retro Tv is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Retro Tv free to download?

Yes, Retro Tv is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Retro Tv

Similar Models

Add to Collection