RetroPie Handheld

I took the Frame from the "Case for TouchScreen 7" and remixed it to include game controls. More information to come including a list of materials.

My printer only prints up to 6" in all directions so I also split the frame in half.

I used the following image for connecting my buttons to the raspberry pi:
https://raw.githubusercontent.com/DigitalLumberjack/mk_arcade_joystick_rpi/master/wiki/images/mk_joystick_arcade_GPIOsb+.png

For button wiring:
Take a look at the images for help but basically for each set of controls you need to wire in a common ground wire that plugs into the raspberry pie then you need one wire for each direction and button wired to the raspberry pi.

For wiring in the battery I followed this diagram:
https://learn.adafruit.com/7-portable-raspberry-pi-multitouch-tablet?view=all#circuit-diagram

OS:
Install Raspian Jesse:
https://www.raspberrypi.org/downloads/raspbian/

Ran update/upgrade
sudo apt-get update
sudo apt-get upgrade

Installed