Thingiverse
REV Driver Hub protective case
6
Downloads
4
Likes
0
Makes
Team 3954 Pink to the Future designed this protective Cover for the REV driver hub. Of course, all necessary connections/buttons are still accessible. There is a small gap (0,5mm) left free to adapt for printer inaccuracy.
Because the cover is split into two parts, it is super easy to print without supports.
Both parts are screwed together with M3 (hex) bolts as used commonly in 3D printers or by REV itself.
Keeping your precious driver hub safe is now so easy!
We printed it in (pink) PLA but using TPU will probably work even better.
The print is not very demanding to your printer, so either 0,2 or 0,3 will work. GBigger nozzles (> 0,5) also should be fine.
If you want to customize, we included the STEP files as well.
Keep learning and keep havin'fun!
Because the cover is split into two parts, it is super easy to print without supports.
Both parts are screwed together with M3 (hex) bolts as used commonly in 3D printers or by REV itself.
Keeping your precious driver hub safe is now so easy!
We printed it in (pink) PLA but using TPU will probably work even better.
The print is not very demanding to your printer, so either 0,2 or 0,3 will work. GBigger nozzles (> 0,5) also should be fine.
If you want to customize, we included the STEP files as well.
Keep learning and keep havin'fun!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!