Thingiverse

Rev Power Switch Mount

von Cad23dPrint

12 Downloads

8 Likes

0 Makes

This is a recessed panel mount for the [Rev power switch](http://www.revrobotics.com/rev-31-1387/) and includes an optional shield to protect the wires if needed. Recessing the switch helps protect the switch from contact from another robot. The mount was created to be attached to a panel so we've included a template for marking the holes needed for mounting.

Hardware required:
2 [M3x20 Countersunk Screws](https://www.trimcraftaviationrc.com/index.php?route=product/product&path=24_3&product_id=350)
2 [M3 Nuts](https://www.trimcraftaviationrc.com/index.php?route=product/product&path=7_29&product_id=234) OR [M3 heat set threaded inserts](https://www.trimcraftaviationrc.com/index.php?route=product/product&path=75&product_id=528)

Here's a video showing how I add heat set threaded inserts to 3D printed parts:
https://www.youtube.com/watch?v=tSY3H7MhyD0

FirstFTC FirstTechChallenge FIRST FTC Robotics FIRST Robotics FIRST Tech Challenge FTC Robotics mount rev Rev Robotics robot robotics switch mount team 8907 FirstFTC FirstTechChallenge FIRST FTC Robotics FIRST Robotics FIRST Tech Challenge FTC Robotics mount rev Rev Robotics robot robotics switch mount team 8907

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Rev Power Switch Mount

Zur Sammlung hinzufügen