RFID Pokemon

These are remixes of [FLOWALISTIK](https://www.thingiverse.com/FLOWALISTIK/about)'s low poly pokemon.

I added a base to each of the pokemon. The bases have a small hole cut out that will fit 25mm RFID tag stickers.

Note that you'll need to add a pause into the gcode just before the printer adds the layer that will cap the hole (~2 to 2.2 mm up, you'll have to look at the layers in your slicer). I know you can do this in the gcode manually, but the easiest way I've found to do it is via prusa's site for adding in color changes: https://www.prusaprinters.org/color-print/. I just added a color change that causes the printer to pause, place the sticker, and then put the same filament in to finish the print.

I'm using these figurines for a hello-world codebase I built while learning RFID. The code and an overview video can be found here:
- https://github.com/chris-schmitz/hello-rfid
- Figurines: https://vimeo.com/308720192
- Mount: https://vimeo.com/308997334