RG35XX "ShowCase"

This is a case designed for the Anbernic 35XX handheld. It works as a protective case while on the go, and a display stand when not.

As with all my other retro handheld case designs, I make the designs available to everyone for free - if you end up making it for yourself and really like it, consider using the "tip the designer" button here on Thingiverse :) Thank you

Features a simple but secure latching mechanism, and a recessed cutout in the side of the case to prevent the power button from accidently being pressed.

If making one for yourself, I recommend #16 wire brad nails to use as hinge pins on either side: https://www.homedepot.com/p/16-x-1-1-4-in-Stainless-Wire-Brads-1-oz-802644/204281724. The hinge holes are 2mm in diameter so a smaller rod or even a piece of filament can be used.

And adhesive-backed felt to protect the screen on the inside (can be found at a craft store called "velvet drawer liner" or "jewelry box liner".

Print both halves outer-face down,