Thingiverse
RG65 Sailboat Vector
por ELexONE
63
Descargas
69
Likes
2
Makes
My design of a RG65 Sailboat.
It is an easy to build and easy to sail yacht. So a nice boat for beginners and more ;-)
It is important to say, that the hull is printed with a wall thickness of 1,3mm with LW PLA. Only the hatch have to be printed with flexible filament like tpu. Into deck passage i put a teflon tube as a bowden. That goes from centerbord pocket to the deck. Servo lever for mainsheet is 39mm long.
The volume is designed for a sailing weight of 977g.
My hull have a weight of 187g with ruder. My Keel and ballast have a weight of 695g. I am sailing it with a keel lenght of round about 28cm.
If you have questions i can help you at facebook:
https://www.facebook.com/groups/823401911152313/permalink/2126214150871076/
Look also at: https://www.thingiverse.com/thing:5196208
and: https://www.thingiverse.com/thing:5191655
It is an easy to build and easy to sail yacht. So a nice boat for beginners and more ;-)
It is important to say, that the hull is printed with a wall thickness of 1,3mm with LW PLA. Only the hatch have to be printed with flexible filament like tpu. Into deck passage i put a teflon tube as a bowden. That goes from centerbord pocket to the deck. Servo lever for mainsheet is 39mm long.
The volume is designed for a sailing weight of 977g.
My hull have a weight of 187g with ruder. My Keel and ballast have a weight of 695g. I am sailing it with a keel lenght of round about 28cm.
If you have questions i can help you at facebook:
https://www.facebook.com/groups/823401911152313/permalink/2126214150871076/
Look also at: https://www.thingiverse.com/thing:5196208
and: https://www.thingiverse.com/thing:5191655
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!