Rhino - Boxedables

Rhino - Boxedables A commercial license is available on my Patreon: 👉 https://www.patreon.com/c/BOXEDABLES Recommended Slicer Settings: Layer Height: 0.16mm Initial Layer Height: 0.2mm Line Width (Initial Layer): 0.55mm Elephant Foot Compensation: 0.1mm Precise Z Height: Enabled Wall Order: Outer → Inner Wall Loops: 6 Infill Density: 20% Infill Pattern: Gyroid Initial Layer Speed: 25mm/s Infill Speed: 80mm/s Seam Alignment: Aligned or Back (Paint the seam at the back of the mode