Rifle stock cheek riser

This is a stock cheek riser for the Thompson/Center T/CR22 stock made by Magpul, similar to their Hunter X-22 stock. This has a 4 degree slope canceling out the downward slope in most 10/22 stocks. This puts the surface parallel to the bore so that forward/backward movements don't change eye elevation, allowing for easier re-positioning for proper eye relief at various magnification levels.

There is a 1" slot for a velcro cinch strap or zip ties. Flexible materials are better for conforming to the stock. I recommend TPU at 50-60% infill. If you're printing in harder materials it can help to wrap the stock in duct tape or electrical tape first for better grip, and to protect the stock surface.

Two riser heights are provided, one with approximately 3/4" rise at the center and the other approximately 1".

The two shims allow for fine tuning of height. They should only be printed in flexible materials or if printed in typical materials like PLA, ABS, or PETG, heated until slightly