Thingiverse
Ring Doorbell Siding Mount
by Sunookitsune
26
Downloads
9
Likes
0
Makes
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these.
They should print with no supports if you print it with the bottom against the bed (the sides are likely to work too, but I didn't try it). If you use these, you will likely need longer screws than the ones that come with the Ring, I used 1.25" #4 wood screws, and they worked nicely.
I printed in PETG, and would recommend that (or ABS). PLA is unlikely to hold up well outdoors.
They should print with no supports if you print it with the bottom against the bed (the sides are likely to work too, but I didn't try it). If you use these, you will likely need longer screws than the ones that come with the Ring, I used 1.25" #4 wood screws, and they worked nicely.
I printed in PETG, and would recommend that (or ABS). PLA is unlikely to hold up well outdoors.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!