Thingiverse

Ring Indoor Camera Corner and Pipe Mount

von natdoggy2

26 Downloads

16 Likes

0 Makes

This is a mount for a Ring Indoor Camera. This mount will allow you to slide in the Ring provided circular mount into this mount. This mount can be attached to a wall corner with adhesive strips or screws. You can also attach it to a 1/4 copper pipe as shown in the images using a zip tie through the screw holes. There are two STL files. One is straight and one has a slight downward angle.

caera mount camera corner fpv camera mount keyring mount pipe ring ring camera Ring Corner scan Water pipe

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Mindest-Druckbett

50 mm (Klein)

Nachbearbeitung

Kleben, Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Ring Indoor Camera Corner and Pipe Mount

Zur Sammlung hinzufügen