Ring Keypad (Gen2) Flush Mount Kit

Ring Keypad (Gen2) Flush Mount KitThis includes all the printed parts you need to convert your on-wall mounted Ring Keypad (Gen 2) to a flush mounted keypad for the finished-off look. You will still need to find/purchase the hardware and, if desired, a charging connection. I recommend a Tough PLA of some kind or maybe ABS. I chose Sunlu PLA+ 2.0 White because it was the closest match white I could find to the Ring white and it happens to be some of the toughest PLA I know. There are 2 profiles. You will need to print each plate.With AMS - uses PLA with PETG as support interface on the Wall Bracket. This is highly recommended if you have an AMS. It makes support removal very easy and gives a nice smooth surface. Just grab one edge of the supports with a pair of plyers and give it a little tug and they will come right off. You can see in the picture below where I grabbed the supports. I recommend pure PETG and nothing modified like PETG-HF or High Speed PETG as they tend to not separate