Thingiverse

Ring Pathlight Side Mount/Post

by physicay

0 Downloads

2 Likes

0 Makes

Ring Pathlight angled side mount. Designed to mount to a wooden post on a porch.

Not sure if this will support if not on the ground.

Prints fine without supports but add if you like. I used 4 perimeters for added strength.

If in the sun, ABS or ASA or other sun/weather resistant filament should be used.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS, Wood PLA, ASA

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ring Pathlight Side Mount/Post?

Any FDM printer should handle Ring Pathlight Side Mount/Post just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Ring Pathlight Side Mount/Post need supports when printing?

No supports needed for Ring Pathlight Side Mount/Post — it's designed to print clean off the bed.

What file format is Ring Pathlight Side Mount/Post available in?

Ring Pathlight Side Mount/Post is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ring Pathlight Side Mount/Post free to download?

Yes, Ring Pathlight Side Mount/Post is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Ring Pathlight Side Mount/Post

Add to Collection