Slicer Discord
Ring Replacement Battery – 3D printable model from Thingiverse Thingiverse

Ring Replacement Battery

9 Downloads
8 Likes
0 Makes
Go to Model
Ring Battery Replacement
====================

Do you ever get frustrated that an item that **should** be cheap, isn't?

One example of this is the Ring brand of doorbells, indoor and outdoor security camera batteries. These are comprised of two 18650 batteries inside a custom casing with a charger and a few other sensors. Most likely temperature, over current and under current protection. Overall, they're very simple items.

The 18650 batteries should cost around $3-5 each for consumers, the charging circuit around $2-3 and the other sensors, LED's, and casing no more than $1-2. The entire battery can be built for around $10. That's at the consumer level. A larger company would cut this cost by a good margin.

So why are they being sold, in Australia, for [$50](https://www.jbhifi.com.au/products/ring-quick-release-battery-pack)? Profiteering. You get one battery with each device, and they take around 11-12 hours to fully charge. Not many people want to be without the protec
Source
Thingiverse
What you need to print this: Beginner Medium confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Est. print time
12 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Slade1972 also publishes on

17 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Ring Replacement Battery?
Any FDM printer should handle Ring Replacement Battery just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
How long does it take to print Ring Replacement Battery?
According to the design notes, Ring Replacement Battery takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Ring Replacement Battery available in?
Ring Replacement Battery is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Ring Replacement Battery free to download?
Yes, Ring Replacement Battery is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection