Slicer Discord
Ring Storage - Central Piece – 3D printable model from MakerWorld MakerWorld
Characters

Ring Storage - Central Piece

97 Downloads
32 Likes
11 Makes
Go to Model
πŸ”΅ Ring Storage PokΓ© BallPlease note, this is only for the central hinge piece.This ring storage piece is to be used with any of my pokeball designs so that any of them can open up :)– Opens on a hinge with magnet closure– Great for collectibles or storage– Perfect to store a ring in for proposalsWhy have I used physical parts instead of a printed hinge?I've tried a few print in place type hinges but ive never been satisfied with them. they are usually awkward to open and dont have a nice smooth opening. with the hinge and magnet it goes for quality above all else. it has a satisfying opening, and a nice 'Snap' when it closes with the magnetsa 8mm barrel hinge10pcs 0.315inch (8mm) Brass Barrel Hinges Hidden Invisible Cabinet Furniture Hinges Concealed 180 Degree Opening Angle w/40x Screws : Amazon.com.au: Home Improvement5x3 mm disc magnetsSuper Strong Neodymium Magnet Rare Earth Round Cuboid Hole Holder Hook Fishing | eBay AustraliaRing Padded Square- needs to be
Category
Characters
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design Β· significant post-processing
Print-in-place Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA, Polycarbonate
Min. bed size
50 mm (Small)
Post-processing
Sanding, Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Ring Storage - Central Piece?
Any FDM printer should handle Ring Storage - Central Piece just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Ring Storage - Central Piece need supports when printing?
Nope β€” Ring Storage - Central Piece is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
What file format is Ring Storage - Central Piece available in?
Ring Storage - Central Piece is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Ring Storage - Central Piece free to download?
Yes, Ring Storage - Central Piece is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord β˜• Buy me a coffee
DE EN FR ES IT NL

Add to Collection