Thingiverse
RIPS V4 IPS Bracket
1
Downloads
1
Likes
0
Makes
This bracket will work with this kit:
https://www.aliexpress.com/item/1005001509799866.html?spm=a2g0s.9042311.0.0.4dc04c4dcamFeT
The bracket will hold both the circuit board in place as well as the screen. It does not require any tape which in my experience is always a bad idea when working with these thin IPS screens.
The two top posts of the shell need to be trimmed with this bracket and the image position will need to be adjusted in the OSD menu.
Not sure if it is necessary but I also put some isolating tape on the back of the screen where the circuit board is resting against it to prevent potential shorts.
https://www.aliexpress.com/item/1005001509799866.html?spm=a2g0s.9042311.0.0.4dc04c4dcamFeT
The bracket will hold both the circuit board in place as well as the screen. It does not require any tape which in my experience is always a bad idea when working with these thin IPS screens.
The two top posts of the shell need to be trimmed with this bracket and the image position will need to be adjusted in the OSD menu.
Not sure if it is necessary but I also put some isolating tape on the back of the screen where the circuit board is resting against it to prevent potential shorts.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!