Riser Assembly Blocks

I created these simple riser blocks for my wife's laser engraver. The legs of the engraver are one inch wide and the square (or diamond) openings allow the feet of the engraver to sit inside them securely. We use them when we need to add height to the engraver for taller objects. Blocks can be added or removed to adjust the height 25mm up or down. 25mm is extremely close to 1 inch. The cube portion of each block is 25 x 40 x 40 mm. The “kit” consists of 3 types of blocks. Main Riser Block - This block has a 15 mm deep diamond opening on top and a 13 mm tall diamond extension on the bottom. These can be stacked by inserting the diamond extension into the diamond opening. Please wait for the riser blocks to cool down before assembling for proper fit. Technically, these are the only blocks you need for stacking. However, your bottom block will be 38 mm tall because of the extension on the bottom. If you want each block layer to be 25mm tall, you must print a Bottom Riser Block.Bottom