Riser Legs for AM8 Printer

These legs will raise your AM8 printer frame about 10cm and will give you some space underneath for things like my MKS Gen 1.4 Electronics Control Box (https://www.thingiverse.com/thing:3793851)

There is only one .STL file but what you need to do is print two the normal orientation and then print two more that you mirror in your slicer to create the opposite orientation. The Standard orientation pieces would be for the front left and the rear right.

Hardware that you will need to mount the legs:

24 - M5 x 10mm Hex Button Head Screws
24 - M5 T-Slot Nuts
4 - M5 x 20mm Hex Socket Head Screws (To attach feet)
4 - M5 Nuts (Inserts in legs to attach feet)
4 - Rubber Feet (Like these https://www.amazon.com/BCP-24pcs-Bumpers-Rubber-21x12mm/dp/B073PWW95L/ref=sr_1_1?keywords=Black+Color+Rubber+Feet%2C+21x12mm&qid=1572482568&sr=8-1)

I used a hard rubber mallet to insert the M5 nuts into the bottom of the legs.
The two top facing M5 button head screws in each leg were fastened