Thingiverse
Ritewing Mini Drak Full Cover Set
by FLYN_001
13
Downloads
9
Likes
0
Makes
Full set of covers, lots of variations! Pick & mix! .Zip has full package.
Don't forget to download my Fuselage Bridge file to connect the front & rear covers.
Be careful of the concave ones they might be a bit tricky to print.
You will probably need to use 0.1mm layer height for the concave versions, or if your slicer can do it use the variable layer height function, 0.1mm for lower concave sections & move up to 0.2mm for the upper parts.
Maybe cut a model down & test a small section first on your setup to dial in your settings.
Don't forget to download my Fuselage Bridge file to connect the front & rear covers.
Be careful of the concave ones they might be a bit tricky to print.
You will probably need to use 0.1mm layer height for the concave versions, or if your slicer can do it use the variable layer height function, 0.1mm for lower concave sections & move up to 0.2mm for the upper parts.
Maybe cut a model down & test a small section first on your setup to dial in your settings.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!