Slicer Discord
RM-01 Rocket – 3D-Druckmodell von Thingiverse Thingiverse

RM-01 Rocket

48 Downloads
29 Likes
0 Makes
Zum Modell
RM-01 Model Rocket

Overall very stable rocket, designed to be used with an altimeter. Conservative motor sizing keeps flights manageable for limited launch areas.

>Designed for use with BT-55 body tubes
>Designed for use with Estes C6-5 motors
>Nose Cone vented for Altimeter use (Altimeter 2 from Jolly Logic)
>Altimeter Bay inserts into nose cone and is held in place with (2) 1/4" 10/32 NF set screws
>Main body tube length: 18"
>Parachute bay length: 4"
>Designed for 14" parachute

Specifications:

Overall Length: 28.7"
Fuselage Diameter: 1.32"
Nose Cone Height: 4"
Max Width: 5"
Dry Mass: 123 g
Loaded Mass: 155 g

Typical Performance:

Peak Altitude: 250-300'
Peak Speed: ~85 mph
Peak Acceleration: 9.8 G
Descent Speed: ~10 mph
Flight Duration: 15-25 s






Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen